MODEL : MIT-9301 / 9302

Arbitary & Function Generator 31MHz

 
SPECIFICATIONS
  • Waveform Specifications

    Standard Function

    Sine, Square, Triangle, Ramp, Noise, Arbitrary

    AWC Software

    Window 95, 98 ,2000, NT, ME, XP

    AWC Function

    Sine, Square, Triangle, Ramp, Damped Sine, Exponential,
    Rise, Exponential Fall, DC, Noise, Freehand, Line

    Waveform Length

    16 to 16,383 points

    Amplitude resolution

    12 bits

    Sampling Rate

    40M samples/sec

     

  • Frequency Characteristics Specificatons
    .Sine, Square : 0.01 uHz to 31MHz
    .Ramp, Triangle : 0.01uHz to 2MHz
    .Noise : 10MHz(64BITS M Type)

  • Output Characteristics Specifications
    .Output : MIT 9301[1Channel], MIT 9302[2Channel]
    .Source Impedance : 50Ω Floating
    .Output Unit : Vpp, Vrms, dBm, %
    .Sync Output : Front-Panel TTL Output for each channel
    .Channel Crosstalk : <0.05% [MIT 9302 only]
    .DC Offset Range : ±5V(limited such that |Vac peak|+|Vdc|<5V
    .Amplitude Range : 0.05Vp-p to 10Vp-p into 50Ω

  •  
    5 - 10 Vpp
    0.05 - 5 Vpp
    Sine Wave Amplitude
    Accuracy
    (0V DC Offset)
    0.01uHz < 100kHz
    ±0.2dB
    ±0.4dB
    100kHz < 20MHz
    ±0.3dB
    ±0.4dB
    20MHz < 25MHz
    ±0.6dB
    ±0.8dB
    25MHz < 31MHz
    ±0.9dB
    ±0.8dB
    Square Wave Amplitude
    Accuracy
    0.01uHz < 100kHz
    ±3dB
    ±5dB
    100kHz < 20MHz
    ±6dB
    ±8dB
    20MHz < 31MHz
    ±15dB
    ±16dB
    Triangle, Ramp, Arbitrary
    Amplitude Accuracy
    0.01uHz < 100kHz
    ±4dB
    ±8dB
    100kHz < 2MHz
    ±5dB
    ±9dB

     

  • Sine Wave Spectral Purity Specifications
    Squrious
    Components
    DC to 2MHz < -65dBc (non-harmonic)
    2MHz to 31MHz < -65dBc + 6dBc/octave (non-harmonic)
    <-50dBc (sine, 5Vpp)
    Harmonic
    Distortion
    Harmonically related signals will be less than
    DC to 1 MHz (Sine, 1Vpp) < -45dBc
    1MHz to 31MHz
    (Sine, 1Vpp)
    < -32dBc

     

  • Signal Characteristics Specifications
    .Square Wave
      - Rise/Fall Time : < 15ns (10% to 90%)
    .Ramps, Triangle and Arbitrary Waveforms
      - Rise/Fall Time : 35ns


  • Modulation Characteristics Specifications
    Amplitude
    Modulation
    Source Internal(sine, square, triangle, ramp or arbitary)
    or External
    Rate 0.001Hz to 10kHz internal, 20kHz max external
    External Input ±5V for 100% modulation, 100㏀ impedance
    Frequency
    Modulation
    Source Internal(sine, square, triangle,ramp or arbitary)
    Rate 0.001Hz to 10kHz
    Span 0.01uHz to 31MHz (2MHz for triangle, ramp)
    Phase
    Modulation
    Source Internal(sine, square, triangle,ramp or arbitary)
    Rate 0.001Hz to 10kHz
    Span 9999.99˚
    Burst
    Modulation
    Waveform sine, square, triangle, ramp, arbitary
    Frequency 2MHz to sine, square, triangle, ramp, ARB
    Count 1 to 65,000 cycle / burst
    Phase Shift ≤100KHz
    Frequency
    Sweep
    Type Linear or Log
    Time 0.001Hz to 10kHz
    Span 0.01uHz to 31MHz(2MHz for triangle, ramp)
    Marker Output Two markers may be set at any sweep point
    (TTL output)
    Sweep Output 0 ~ 10V linear ramp signal, synchronized to sweep

     

  • Standard Timebase
    .Accuracy : ±3ppm (20℃to 30℃)
    .Aging : ±3ppm/year
    .Input : 10MHz/N ±2ppm. N=1 to 8, 1Vp-p minimum input level
    .Output : 10MHz, > 1Vp-p sine into 50Ω

  • General
    .Operating Temperature : 5℃ to 40℃
    .Operating Humidity : 50% to 80%
    .Weight : MIT 9301 8.2Kg, MIT 9302 8.7Kg
    .Dimensions : 363mm(W) x 109mm(H) x 386mm(D)
    .Power Supply : 100/120/220/230 Vac(±10%) 50/60Hz
    .Power Consumption : MIT 9301 46W, MIT 9302 80W


  • 옵션
    .GPIB, 임의파형 편집용 S/W

  • 기본
    .RS232C, 퓨트 2EA, BNC to BNC (1/2)EA, 전원코드, 사용설명서