|
Analog/Digital
Oscilloscope150MHz/2ch(Autoset, Readout & Cursor) |
|
|
Triggering
- Automatic (peak to peak):
20Hz-250MHz (³0.5div.)
- Normal with level control:
DC-250MHz (³0.5div.)
- Indicator for trigger action:
LED
- Slope: positive or negative
- Sources: Channel I or II, line and
external
- ALT. Triggering: CH I/CH II
(³ 0.8div.)
- Coupling:
- AC (10 250MHz), DC (0
250MHz), HF (50kHz 250MHz),
- LF (0 1.5kHz), NR (Noise
reject) 0 - 50MHz (³
0.8div.)
- Triggering time base B: normal
with level control and slope selection (0 250 MHz)
- External: ³0.3Vpp (0 250MHz)
- Active TV Sync. Separator:field
& line, + / -
|
|
Horiziontal Deflection
- Analog Time Base: Accuracy in
calibr. position 3%; 1-2-5 sequence
- A: 0.5s 50ns/div.
- B: 20ms 50ns/div.
- Operating modes: A or B,
alternate A/B
- Variable: 2.5:1 up to
1.25s/div.
- X-MAG. x10 (±5%) max.
5ns/div.
- Holdoff time: variable to approx.
10:1
- Bandwidth X-amplifier: 0 3MHz
(-3dB)
- X-Y phase shift: <3° below
220kHz
- Digital Time Base:
- Accuracy: 3%; 1-2-5 sequence
- A: 100s 0.5µs/div.
- B: 20ms 0.5µs/div.
- Operating modes: A or B,
alternate A/B
- X-MAG. x10 (±5%):
50ns/div.
- Bandwidth X-Amplifier: 0 20MHz
(-3dB)
- X-Y phase shift: <3° below
20MHz
- Input X-amplifier: via Channel
II
- Sensitivity : see CH II
|
|
Digital Storage
- Operating modes: Refresh, Roll,
Single, XY
- Average (2 to 512 waveforms), Envelope
- Dot Join function: automatically
- Acquisition (real time)
- 8 bit flash A/D max. 200MS/s
- Display refresh rate: max.
180/s
- Memory & display: 2k x 8bit
per channel
- Reference memory: 2 waveforms 2k x
8bit
- Saved in: (EEPROM).
- Resolution (samples/div.):
X200/div.
- Y 25 /div.
- XY 25 x 25/div.
- Pre-/Post Trigger: 25,50,75,100,
-25,-50,-75%
|
|
Operation/Control
- Manual: front panel
switches
- Auto Set: signal related
automatic
- parameter selection
- Save & Recall: 9 user defined
parameter settings
|
|
Readout & Cursor (analog/digital)
- Display of parameter settings and other functions on the
screen. Triggerpoint indication. Cursor measurement of DU, Dt or 1/Dt
(frequency), separate or in tracking mode.
- Readout intensity: separately
adjustable.
|
Interface
- PC remote control: builtin RS232
interface
- Option: HO79-6
Multifunction-Interface
- IEEE-Bus, RS232, and Centronics
- Output formats (HO79-6): PCL, Post
Script, HPGL, EPSON
|
Component Tester
- Test voltage: max. 7Vrms (o/c).
- Test current: max. 7mArms
(s/c)
- Test frequency: approx.50Hz
- One test lead is grounded (Safety Earth)
|
General Information
- CRT: D14-375GY, 8x10cm internal
graticule
- Acceleration voltage: approx.
14kV
- Trace rotation: adjustable on
front panel
- Calibrator: 0.2V ±1%, » 1kHz/1MHz
(tr <4ns)
- Line voltage: 100-240V AC ±10%,
50/60Hz
- Power consumption:approx. 42 Watt
at 50Hz
- Min./Max. ambient temperature:
0°C...+40°C
- Protective system: Safety class I
(IEC1010-1)
- Weight: approx. 5.6kg
(12.4lbs)
- Color: techno-brown
- Cabinet: W 285, H
125, D 380 mm
- Lockable tilt handle
| | |
|
| | |