Horiziontal Deflection Time base A: 22 calibrated steps (±3%) from 0.5s/div.  50ns/div. in 1-2-5 sequence variable 2.5:1 up to 1.25s/div. X-Mag. x10: 5ns/div. (±5%) Holdoff time: variable to approx. 10:1 Time base B: 18 calibrated steps (±3%) from 20ms/div. to 50ns/div. in 1-2-5 sequence Operating modes: A or B, alternate A/B Bandwidth X-amplifier: 0 - 3MHz (-3dB) Input X-amplifier: via Channel II Sensitivity: see CH II X-Y phase shift: <3° below 220kHz     Operation/Control Manual front panel switches Auto Set (automatic parameter selection) Save/Recall: 9 user-defined parameter settings Readout: Display of parameter settings Cursor measurement: DV, Dt or D1/t (frequ.) Remote control:with built in RS-232 interface     Component Tester Test voltage: max. 7Vrms  (o/c) approx. 50Hz Test current: max. 7mArms  (s/c) approx. 50Hz Test frequency: One test lead is grounded (Safety Earth)     General Information CRT: D14-375GY, 8 x 10cm, internal graticule Acceleration voltage: approx. 14 kV Trace rotation: adjustable on front panel Calibrator: 0.2V ±1%, » 1kHz/1MHz (tr <6ns) Line Voltage / Power consumption: 100-240V AC ±10% /  approx.35Watt. 50/60Hz Min./Max. ambient temperature: 0°C + 40°C Protective system: Safety class I (IEC1010-1) Weight: approx. 5.9 kg. Cabinet / Color: W 285, H 125, D 380 mm / techno-brown