GPT-705/715 & GPI-725/735

AC/DC/IR Electrical Safety Tester

. AC, DC Withstanding Voltage Test & Insulation Resistance Test . Arc Detect and Continuity Check as Additional Features . Thoughtful safety design to give a safe test environment . Output voltage and current limit could be set without HV output . 6 sets memory for front panel setting and test sequence store/recall . Linear amplifier with feedback control to provide highly regulated power . 9 pin PLC control for start, stop, and test result output . 100VA Test Capacity

Model	AC	DC	IR
GPT-705	*
GPT-715	*	*
GPI-725	*		*
GPI-735	*	*	*

SPECIFICATIONS
AC HI-POT	Voltage Range	0.100kV ~ 5.000kV
	Voltage Step	5V/step
	Voltage Regulation	1% of reading + 5 counts
	Voltage Accuracy	1% of reading + 5 counts
	Max Current	20mA @5kV
	Current Limit	0.10 ~ 20mA, 0.01mA/step
	Current Accuracy	1% of reading + 5 counts

DC HI-POT (GPT-715/735 ONLY)	Voltage Range	0.100kV ~ 6.000kV
	Voltage Step	5V/step
	Voltage Regulation	1% of reading + 5 counts
	Voltage Accuracy	1% of reading + 5 counts
	Max Current	7.5mA @5kV
	Current Limit	0.10 ~ 7.5mA, 0.01mA/step
	Current Accuracy	1% of reading + 5 counts

Insulation Resistance (GPI-725/735 ONLY)	DC Voltage	500V/1000V
	Resistance Range	1 ~ 9999M
	Resistance Accuracy	1 ~ 500M : 5% of reading 501 ~ 2000M : 10% of reading

Continuity Check	Test Current	0.1A
	Current Accuracy	10%
	Detect Level	1Ω
	Detect Accuracy	0.1Ω

ARC Detect	Detect Current	10 level (2 ~ 20mA)

Storage	Groups	6
Storage	Steps per Group	6

Interface	Type of terminal	9-pin D-sub connector
	Output Breakdown Voltage	±350V
	Continuous Load Current	±100mA

Power Source	AC100V,120V,220V,230V±10% 50/60Hz

Accessories	Power cord x 1, Instruction manual x 1, GHT-105 x 1

Dimensions & Weight	330(W) x 149(H) x 446(D) mm, Approx. 12kg