SPECIFICATIONS | |||||||||||||||||||||||||||||||
CRT |
Type |
6-inch
rectangular type with internal graticule; | |||||||||||||||||||||||||||||
Phosphor | P31 | ||||||||||||||||||||||||||||||
Accelerating Potential | 14 kV approx. | ||||||||||||||||||||||||||||||
Illumination | Continuously adjustable | ||||||||||||||||||||||||||||||
Z-axis input | Coupling : DC | ||||||||||||||||||||||||||||||
Sensitivity : 5V or more | |||||||||||||||||||||||||||||||
Maximum input voltage : 30V (DC+AC peak) at 1kHz or less | |||||||||||||||||||||||||||||||
Bandwidth : DC ~ 5MHz | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
VERTICAL SYSTEM |
Sensitivity | 2mV ~ 5V/DIV,11 step in 1-2-5 sequence | |||||||||||||||||||||||||||||
Sensitivity Accuracy | < 3% (5 DIV at the center of display) | ||||||||||||||||||||||||||||||
Vernier Vertical Sensitivity | Continuously variable to 1/2.5 or less panel-indicate value | ||||||||||||||||||||||||||||||
Bandwidth(-3dB) | DC ~ 200MHz (2mV/DIV : DC ~ 20MHz) | ||||||||||||||||||||||||||||||
Rise Time | 1.75nS (2mV/DIV : 17.5 nS) | ||||||||||||||||||||||||||||||
Signal Delay | Leading edge can be monitored | ||||||||||||||||||||||||||||||
Max. Input Voltage | 400V (DC+AC peak) at 1kHz or less | ||||||||||||||||||||||||||||||
Input Coupling | AC, DC, GND | ||||||||||||||||||||||||||||||
Input Impedance | 1M£[+2%// approx. 25pF | ||||||||||||||||||||||||||||||
Vertical Mode | CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV. | ||||||||||||||||||||||||||||||
Bandwidth Limited | 20MHz | ||||||||||||||||||||||||||||||
Common-Mode Rejection Ratio | 50 :1 or better at 50kHz | ||||||||||||||||||||||||||||||
Dynamic Range | 8 div at 100MHz¡F5 div at 200MHz | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
HORIZONTAL SYSTEM |
Horizontal Modes | MAIN(A), ALT, DELAY(B) | |||||||||||||||||||||||||||||
A(main)Sweep Time | 20nS ~ 0.5S / DIV, continuously variable (UNCAL) | ||||||||||||||||||||||||||||||
B(delay)Sweep Time | 20nS ~ 50mS/DIV | ||||||||||||||||||||||||||||||
Accuracy | + 3% (+ 5% at x 10 MAG) | ||||||||||||||||||||||||||||||
Sweep Magnification | x 10 (maximum sweep time 2nS / DIV) | ||||||||||||||||||||||||||||||
Hold Off Time | Variable | ||||||||||||||||||||||||||||||
Delay Time | 1µS ~ 5S | ||||||||||||||||||||||||||||||
Delay Jitter | Better than 1:20000 | ||||||||||||||||||||||||||||||
Alternate Separation | Variable | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
TRIGGER |
Trigger Modes | AUTO, NORM, TV | |||||||||||||||||||||||||||||
Trigger Source | CH1, CH2, LINE, EXT, EXT/10 | ||||||||||||||||||||||||||||||
Trigger Coupling | AC, DC, HFR, LFR, NR | ||||||||||||||||||||||||||||||
Trigger Slope | "+" or "-" polarity or TV sync polarity | ||||||||||||||||||||||||||||||
Trigger Sensitivity |
| ||||||||||||||||||||||||||||||
Trigger Level Range | INT :±4DIV or more¡FEXT :±0.4V or more¡FEXT/10 :±4V or more | ||||||||||||||||||||||||||||||
TV Triggering | Mode : TV-V, TV-H, TV-LINE | ||||||||||||||||||||||||||||||
TV-Line Selection |
|
||||||||||||||||||||||||||||||
Max. External Input Voltage |
400V (DC+AC peak) at 1kHz | ||||||||||||||||||||||||||||||
External Input Impedance |
1M£[ + 5%, // approx. 25pF | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
X-Y OPERATION |
Mode | X-axis : selectable CH1, EXT, EXT/10 | |||||||||||||||||||||||||||||
Y-axis : selectable CH1, CH2, CH1 and CH2 | |||||||||||||||||||||||||||||||
Sensitivity Accuracy | 2mV ~ 5V / DIV ±3%¡F EXT : 0.1V / DIV±5%¡F EXT / 10 :1V / DIV±5% | ||||||||||||||||||||||||||||||
X-axis Bandwidth | DC ~ 500kHz (-3dB) | ||||||||||||||||||||||||||||||
Phase Error | 3º or less from DC ~ 50kHz | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
OUTPUT SIGNAL |
Trigger Signal Output | Voltage : approx. 25mV/DIV into 50£[ | |||||||||||||||||||||||||||||
Frequency response : DC ~ 10MHz | |||||||||||||||||||||||||||||||
Calibrator Output | 1kHz Squarewave, 2Vpp±2% | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
CURSOR READOUT FUNCTION |
Cursor Measurement Function | £GV¡A£GV%¡A£GVdB¡A£GT¡A1/£GT¡A£GT%¡A£G£c | |||||||||||||||||||||||||||||
Cursor Resolution | 1 / 100 DIV | ||||||||||||||||||||||||||||||
Effective Cursor Range | Vertical : ±3DIV ; Horizontal : ±4DIV | ||||||||||||||||||||||||||||||
Panel Setting Display | Vertical : V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND | ||||||||||||||||||||||||||||||
Horizontal : S/DIV(MTB,DTB), UNCAL, x 10MAG, delay time, HO | |||||||||||||||||||||||||||||||
Trigger : source, coupling, slope, level, TV-V, TV-H | |||||||||||||||||||||||||||||||
Others : X-Y, lock, save/recall MEM 0-9 | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
AUTO MEASUREMENT FUNCTION |
Parameter Function | FREQ, PERIOD, ±WIDTH, ±DUTY ( + or - polarity selected by trigger slope) | |||||||||||||||||||||||||||||
Display Digits | Max. 6-digits, decimal | ||||||||||||||||||||||||||||||
Frequency Range | 50Hz ~ 200MHz | ||||||||||||||||||||||||||||||
Accuracy | 1kHz ~ 200MHz : +0.01%¡F50Hz ~ 1kHz : +0.05% | ||||||||||||||||||||||||||||||
Measuring Sensitivity | >2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources) | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
SPECIAL FUNCTION |
Auto Set | Input Channel : CH1, CH2¡FFrequency Response 50Hz~50MHz | |||||||||||||||||||||||||||||
Panel Setting Save & Recall | 10 sets | ||||||||||||||||||||||||||||||
Panel Setups Lock | Provided | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
POWER SOURCE | AC 100V / 120V / 230V + 10%, 50 / 60Hz | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
ACCESSORIES | Power
cord x 1; Instruction manual x 1; Probes(10:1/1:1) x 2 | ||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
DIMENSIONS & WEIGHT | 310(W) x 150(H) x 470(D) mm¡FApprox. 9kg |