GCT-630 Ground Continuity Tester

MODEL : GCT-630

Ground Continuity Tester

. AC 32 Amperes High test current . Measuring Resistance from 0 ~ 0.6Ω . Continue & Normal test mode . Four wire measurement . GO-NOGO function . Test and Result output signal ..SPECIFICATIONS

SPECIFICATIONS
Test Current	AC 3A ~ 32A

Test Voltage	MAX 8V AC Typically

Measuring Resistance Range	0 to 0.12Ω, 0 to 0.6Ω 2 ranges

Measuring Accuracy	3A ~ 5A, +10% of full scale
	5A ~ 32A, +5% of full scale

Current Meter	Indicate the testing Current and Setting value of Warning

Resistance Meter	Indicate the testing Resistance and Setting value of Fail and SUBTRACTION

Switching	Zero-start operating switch

Timer	1S, 10S, 1MIN, 10MIN 4 ranges

Warning	Monitor the variation test current, when the test current is beyond+10% of the setting value, the warning operation will proceed.
	The setting value from 3A ~ 32A

Subtraction	The resistance of testing line can be subtracted from the test value
	The subtraction range from 0 ~ 0.1Ω
	Accuracy is ±10%

GO-NOGO Set	If the test reading value is beyond the setting value, the fail will be acting, otherwise the pass will proceed.
	The setting value from 5% ~ 100% of the test range
	Accuracy is ±15% of full scale (3A ~ 5A)；±10% of full scale (5A ~ 32A)

Remote Control	Input high voltage range from 11V ~ 15V, low voltage range from 0 ~ 4V and input low current range below 20mA

Test Mode	Normal：if the warning acted then the test will stop
	Continue：if the warning acted then the test will be continuously

Buzzer	A Buzzer is sounded when the test fail acted

Test Frequency	50Hz or 60Hz independent by Line Voltage

Output Signal	TEST, GO, NG, WARNING, READY, MONITOR

Power Source	AC 100V/120V/220V/240V±10%, 50/60Hz

Accessories	Test Lead GHT-115 x 1, Instruction manual x 1, Power cord x 1

Dimensions & Weight	430(W) x 178(H) x 510(D) mm, Approx. 21kg

This instrument is designed to test Grounding continuity resistance of the monitor, Switching power supplies, Power cord and Electronic appliances.